Cooling Only Cooling/Heating and Room Use Evaporative Air Cooler Portable mini swamp cooler air cooling fan
Product Description
JH162 Household Mini Portable Evaporative Air Cooler
Nature’s most efficient means of cooling is through the evaporation of water.
JHCOOL Evaporative Air Cooler works on the principle of heat absorption by moisture evaporation. It also happens on human skin, the body sweat to cool temperature down.
Higher quality standard of JH168 portable Air Conditioner
1. Water proof motor
2. Water pump protection function against low water level
3. Aluminum material cabinet motor, 100% copper wire
4. Long lifetime water pump
5. Unique designed float valve, available water pressure from 0 bar to 5.5bar
6. Auto swing, remote control, auto timing off
7. Optional auto clean function, To change water every several hours
Advantages of JH168 portable air conditioners
1. Low carbon green product, environmentally friendly, no CFC'S, no damage to the Ozone layer
2. Super energy-saving, only cost 1/10 electricity than air con
3. Less than 1/2 the price of air conditioning
4. Vent cooling, no air recirculation
5. Low purchasing cost, Low power consumption, Low installation cost, Low maintenance cost
Trade Information
As to the smallest volume of order, we welcome buyers of different size at least at this stage , and thus currently have no strict limit on MOQ( minimum order quantity) .
Our Services
Strict Production Standard, CE, CB SAA Certificate Passed
Free Spare Parts as for warranty
Instant Technical Support: Installation / Marketing / After Service. We do not only provide products, but also cooling solutions
OEM
We have own designer, in addition to standard products, we also provide OEM services.
Evaporative cooling will provide substantial energy savings over refrigerated air units. The simplicity of the design allows low maintenance requirements. The evaporative air cooler will provide fresh, filtered air. The outside air that has been cooled will blow the stale inside air out. With the substantial savings on energy and the air constantly changing, the industrial / commercial water air cooler is ideally suited for area cooling or spot cooling in factories, laundries, churches, schools, agri-businesses, restaurants and many other applications.
Q: How much water do I put in?
The amount of water required will vary depending on the size of the unit you own. To help determine the correct level, each water air cooler is equipped with a water level indicator. It can be found on bottom sump of the unit. Add water until the indicator shoes that the water reservoir is filled. Water will leak from the unit if it is overfilled.
Q: At start-up, the air has a slight odor?
Occasionally an evaporative air cooler may give off a slight odor when first put into use. To eliminate this odor, run the unit for an hour, drain all the water from the tank and add fresh water. If odor persists repeat the above procedure until it is eliminated.
Q: How often do I have to fill the mobile unit?
The length of time will vary depending on the dryness of the air and the speed at which the cooler is running. Typically water supplied should last from for one day, or half day, because we design the tank for 8 hours use or 4 hours consumption.
Q: Can the pump run dry?
The unit can be safely run without water in the tank. It will cause no harm to the cooler or the water pump. Never choose cooler with submersible pump that usually used in glass fish bowl. It will burn while lack of water and cause danger.
Q: How do I clean my pads?
Remove the back or top of the unit following the instructions in the operating manual. Note: Be sure to unplug the cooler before you access the inside of the unit. Remove the pad from the unit or back panel. Rinse the pad with fresh water using a hose or soaking the pad in a tub until the mineral deposits disappear. You may want to change the tub water occasionally to accelerate the cleaning process. Allow the pad to sun dry. Reattach the pad to the cooler back panel or reinstall inside the cooler. Replace the top or back panel on the cooler.
Q: How often do I clean my pads?
Pads should be cleaned at least once a season prior to storing for the winter. In hard water areas, cleaning may be required more frequently. Periodic, visual examination is required. Remove the back or top of the cooler following the instructions in the operating manual. Look at the pads. If they show signs of heavy mineral deposits they will need to be cleaned.
Note: Be sure to unplug the unit before you access the inside.
If you want to know more information about our evaporative air cooler here welcome you in any time
Dimension (mm): 360*300*870
Packed size(assembled)mm: 360*410*915
Loading quantity (assembled) in 40HQ: 524pcs
Fujian Jinghui Technology Co.ltd
Fujian Jinghui Technology Co.ltd is located in Fuzhou, the capital of Fujian province, in southeast sea shore of China. Our company is specialized in manufacturing evaporative air cooler (desert cooler or Swamp Cooler). The company was founded in 2006, started with only 4 workers and $10,000 capital. After these years fast growth, now Jinghui company has owned 200 skillful workers in YIXU factory, and averagely sell $20,000 per day.
Persist in “people oriented”, the company always take personnel as foremost. During the past years, by following the value philosophy ‘Kindness, Fine, Speed, Development’, JINGHUI staff made great efforts to producing the best qualityevaporative Air Coolers.
Product Categories : Mini Cooler
Premium Related Products
